The two coils in every AC
The condenser coil sits in the outdoor unit (or the back of a window AC) and releases heat outside. The evaporator coil sits in the indoor unit (or the front of a window AC) and absorbs heat from the room. Both are made of tubes carrying refrigerant, with thin fins to spread heat.
Copper, aluminium or mixed
| Coil type | Construction | Scrap value |
|---|---|---|
| Copper-tube, aluminium fin | Copper tubes threaded through aluminium fins | Higher — contains copper |
| All-aluminium | Aluminium tubes and fins | Lower |
| Microchannel | Flat aluminium tubes | Lower |
Copper-tube coils are common in many older ACs and many current models. Some manufacturers use aluminium coils in certain models to reduce cost.
How coils are graded as scrap
A copper-tube coil with aluminium fins is usually graded as a mixed copper-aluminium category rather than as pure copper, because the two metals need separating. Separated, clean copper tube is graded higher. Coils with brass fittings, solder or steel brackets still attached are graded accordingly.
How to tell what your AC has
- Look at the U-bends at the side of the coil: copper is reddish-brown, aluminium is silver-grey.
- Check the sticker or manual — some brands state the coil type.
- Send a photo of the coil end to the buyer.
The copper pipe between units
A split AC's interconnecting pipe is usually copper. If it was left with you after uninstallation, keep it with the AC. Insulated pipe is graded lower than stripped pipe, but both sell.
Practical takeaway
When asking for a quote, mention the coil type if you know it, or send a photo. Two otherwise similar ACs can differ in value mainly because of their coils. See AC coil scrap buying and copper scrap.
